Delivery:- is free over £100 Incl.vat (see terms) small Postal items will Start at £1.90+vat larger carrier items will be up to £10.5+vat for orders up to 20kg(Actual cost will be worked out by weight once you have entered your address. If you feel the carriage is excessive please contact us and we will look at it for you.)

Roman Blind Kit made up your way

Custom Cassette Chain Lift Head Rail or Roman Blind Kit - Click to change size

Custom Cassette Chain Lift Head Rail or Roman Blind Kit

Ref: PRO3

Click Here For PDF Instructions

You can order just the headrail.
Then the following are optional Bottom Bar, Rods, Tape & Extra Spools
You order just what you need.

Pacer Chain Lift Head Rail an attractively rounded headrail,
The pre-loaded cord spool: ensures the cords pull up straight and at equal speeds, thus making sure the Roman, Austrian, Festoon or London blind pull up neat and straight.
Choosing a control gearing 1:4 for smoother operation for blind weights up to 6kg (Recommended as a slower lift will allow the blind to fall into its folds easier.)
We can supply a lighter 1:1 mechanism for up to 4kg this will allow a faster lift.
These kits are made by us and do not come in retail packaging
As we make these to order we will cut these blind rails to your sizes at no extra cost.
Extra Spools: This choice is optional.
If you feel your blind needs the cords closer together than is supplied with the standard kit. Then add from drop down menu.

Track Size Brackets____ Cord Spools with cord adjuster____
60cm & 90cm 2 2
120cm & 150cm 3 3
180cm & 210cm 4 4
250cm 5 5
300cm 6 6

If you need more spools add from drop down menu
e.g. Roman blinds the reels are spaced at about 60cm centres for Austrian & Festoon you will need 1 per swag and 1 more to take the end of the last swag

When chosen there will be enough sew on loop tape, rod pocket tape, rods and bottom bar to suit the drop and width of blind you have ordered.
There will be a breakdown of the parts for each track on the delivery note sent with each order.
Rods and bottom bars will be supplied 2cm shorter than the track width so you shouldn't need to trim them.

First Select the number of blinds of the same size in the quantity box
1: In the text box: Enter actual blind size width then drop.
2: Choose the track size your blind can be made from.
3: Gearing choice 1:1 for lighter blinds (fast lift) or 1:4 for heavier blinds (Slow lift)
4: Choose the side you would like the chain.
If mixed is chosen you may order more than one blind of the same size with different chain sides.
In the text box state the number of left and right chains required.
5: Choose the type of safety cord adjuster. (This is a spring loaded safety device at the bottom of each cord alowing the cord to pull through should a child get entangled) If you are using rod tapes you will need the hook type if you are sewing in rod pockets you would use the sew on type.
6: Your choice of chain safety device are:- The 'P' Clip This secures the chain at a height of at least 150cm from the floor.
Or the Chain Break this device has a small white or grey chain that connects to the gearing, a longer chain is then fitted to the lower section of the chain break. The break will separate should there be too much pressure on the chain. The chain does not need to be fixed and can be as low as 60cm from the floor.
7: Choose your track height from the floor.
8: Now choose your chain colour.
9: Select the chain length (drop) from the available sizes in the list.
10: Choose a Bottom bar if required
11: If making a blind using rod tapes tick the box and select track width. You will then have a choice of the number of rod tapes for your blind. The number of rod tapes is shown with a sugested drop in brackets
12: If you require rods tick the box and choose the number in a similar way to the last instruction.
13: If you need more spools (Lifting Cords) you can add extra.

Please select next action

Go back orGo to wish list

Recently Viewed