Delivery:- is free over £90 Incl.vat (see terms) small Postal items will Start at £1.75+vat larger carrier items will be up to £8.50+vat for orders up to 20kg(Actual cost will be worked out by weight once you have entered your address. If you feel the carriage is excessive please contact us and we will look at it for you.)

Standard Roman Blind Kit

Our Standard Cassette Chain Lift Roman Blind Kit - Click to change size

Our Standard Cassette Chain Lift Roman Blind Kit

Ref: PRO

Roman Blind Kit with enough rods and Ivory tapes for the size you choose

Pacer Chain Lift Head Rail an attractively rounded headrail,
The pre-loaded cord spool: ensures the cords pull up straight and at equal speeds, making sure the blinds pull up neat and straight.
Choosing a control gearing 1:4 for smoother operation for blind weights up to 6kg (Recommended as a slower lift will allow the blind to fall into its folds easier.)
We can supply a lighter 1:1 mechanism for up to 4kg this will allow a faster lift.
These kits are made by us and do not come in retail packaging

As we make these to order we will cut these blind rails to your sizes at no extra cost.

KITS CONTAIN
Enough cord spools to alow a maximum spacing of 60cm apart and no more than 15cm from each end.

There will be enough Ivory sew on rod pocket loop tape, rods and bottom bar to suit the drop and width of blind you have ordered.
A breakdown of the parts for each track will be on the delivery note sent with each order.
Rods and bottom bars will be supplied 2cm shorter than the track width, so you shouldn't need to trim them.

If you require a more selective choice of parts eg. choice of tape colour, no tape, no rods or eaven track only, then use the next listing.

We do ask for a lot of information, but this is to ensure that not only can we supply you with a blind that conforms to child safety laws but when you fit it, it will still conform. Many other kits don't!
First Select the number of blinds of the same size in the quantity box
1: In the text box: Enter actual blind size width then drop.
2: From the dropdown choose the track width your blind can be made from.
3: Gearing choice 1:1 for lighter blinds 4kg (fast lift) or 1:4 for heavier blinds 6kg (Slow lift)
4: Your choice of chain safety device is, the 'P' Clip This secures the chain at a height of at least 150cm from the floor. Or the Chain Break this device has a small white or grey chain that connects to the gearing, a longer chain is then fitted to the lower section of the chain break. The break will separate should there be too much pressure on the chain. The chain does not need to be fixed and can be as low as 60cm from the floor.
5: Choose your track height from the floor. (This will govern the maximum length of chain you can choose.)
6: Now choose your chain colour.
7: Select the chain length (drop) from the available sizes in the list.
8: Choose the side you would like the chain.
If mixed is chosen you may order more than one blind of the same size with different chain sides.
In the text box state the number of left and right chains required.

Click Here For PDF Instructions

Recently Viewed