Delivery:- is free over £90 Incl.vat (see terms) small Postal items will Start at £1.75+vat larger carrier items will be up to £8.50+vat for orders up to 20kg(Actual cost will be worked out by weight once you have entered your address. If you feel the carriage is excessive please contact us and we will look at it for you.)

Pacer Cassette Roman Blind Kits

Pacer Cassette Roman Blind Kit  - Click to change size

Pacer Cassette Roman Blind Kit


As we make these to order we will cut these blind rails to your sizes at no extra cost.
Please state sizes as width then drop in the text box.
Then from the dropdown lists the following choices.
The size range your blind can be made from.
The gearing choice 1:1 or 1:4 (we would recommend 1:4)
The track height from the floor, this governs the length of chain allowed.
Chain colour required.
Chain length required. This will display up to the maximum size option for each colour
Chain side, the side you would like your controls.
Tape colour required for the rod tapes. (White, Ivory or Translucent)
Then extra spools are optional chose the extra amount if required.
Pacer Chain Lift Head Rail an attractively rounded headrail.
The pre-loaded cord spool ensures the cords pull up straight and at equal speeds, thus making sure the Roman blind pull up neat and straight.
Control geared1:4 for smoother operation at weights up to 8kg (Recommended as a slower lift will allow the blind to fall into its folds better.)
We can supply a lighter mechanism for up to 4kg this will allow a faster lift.
These kits are made by us and do not come in retail packaging

Supplied with Headrail system
Kits:60cm - 90cm Brackets, 2. Cord spools, 2. Cord adjuster, 2. Kits:120cm - 150cm Brackets, 3. Cord spools, 3. Cord adjuster, 3. Kits:180cm - 210cm Brackets, 4. Cord spools,04. Cord adjuster, 4.Kits:240cm Brackets, 5. Cord spools, 5. Cord adjuster, 5.

This allows reels to be a maximum 15cm from each end and no more than 60cm apart. This is what is required for a roman blind.
There will be enough sew on loop tape, rod pocket tape, rods and bottom bar to suit the drop and width of blind you have ordered.
There will be a breakdown of the parts for each track on the delivery note sent with each order.
Rods and bottom bars will be supplied 2cm shorter than the track width so you won't need to trim them.
Chains will have a chain hold down clip attached.
This choice is optional.
If you need more spools add from drop down menu. We will add extra cord spools to your blind if you feel your blind needs the cords closer together than is allowed with the standard kit.

Our products are compliant with the child safety requirements of BS EN 13120
This will mean that for blinds that we don't know the height of, the continuous operating chains will be a maximum length of 1m.
It will be up to the fitter to comply with the standards, as chains without a breakaway connector should be at least 150cm from the floor with a chain hold down clip.

Click Here For PDF Instruction sheet

Conversion Chart Metric / Imperial

Conversion Chart Metric / Imperial

Recently Viewed