Pacer Chain Lift Head Rail an attractively rounded headrail,
The pre-loaded cord spool, ensures the cords pull up straight and at equal speeds, thus making sure the Roman lift eavenly.
This Kit With Chain Break allows for a longer length of chain to be used but must still be a minimum of 60cm from the floor.
This Device is designed to breakaway if too much pressure is applied to the lifting chain we have tested them and they will operate with a 1:1 ratio gearing on the blind.The chain break is best positioned at the bottom of the chain loop with the chain sligtly shorter than the drop of the blind so as not to put pressure on it when lifting the blind. We will position this for you when you enter your size options we will need the width, length & hight of the blind to work this out.
These kits are made by us and do not come in retail packaging
As we make these to order we will cut these blind rails to your sizes at no extra cost.
Please state sizes as width then drop in the text box.
Then from the dropdown lists the following choices.
The size range your blind can be made from.
The track height from the floor, this governs the length of chain allowed.
Chain colour required.
Chain length required. This will display up to the maximum size option for the chain
Chain side, the side you would like your controls.
Tape colour required for the rod tapes. (White, Ivory or Translucent)
Then extra spools are optional chose the extra amount if required.
Supplied with Headrail system
Kits:60cm - 90cm Brackets, 2. Cord spools, 2. Cord adjuster, 2. Kits:120cm - 150cm Brackets, 3. Cord spools, 3. Cord adjuster, 3. Kits:180cm - 210cm Brackets, 4. Cord spools,04. Cord adjuster, 4.Kits:240cm Brackets, 5. Cord spools, 5. Cord adjuster, 5.
This allows reels to be a maximum 15cm from each end and no more than 60cm apart. This is what is required for a roman blind.
There will be enough sew on loop tape, rod pocket tape, rods and bottom bar to suit the drop and width of blind you have ordered.
There will be a breakdown of the parts for each track on the delivery note sent with each order.
Rods and bottom bars will be supplied 2cm shorter than the track width so you won't need to trim them.
Chains will have a chain break attached.
Our products are compliant with the child safety requirements of BS EN 13120
This will mean that for blinds that we don't know the height of, the chains with break will be the shorter of 1m or 2/3rds of the blind drop
It will be up to the fitter to comply with the standards, as chains with a breakaway connector should be at least 60cm from the floor.