Delivery:- is free over £90 Incl.vat (see terms) small Postal items will Start at £1.75+vat larger carrier items will be up to £8.50+vat for orders up to 20kg(Actual cost will be worked out by weight once you have entered your address. If you feel the carriage is excessive please contact us and we will look at it for you.)

Pacer Cassette Roman Blind Track with Chain Break

Pacer Chain Lift Blind Track with Safety Chain Break - Click to change size

Pacer Chain Lift Blind Track with Safety Chain Break

Ref: PROB


Pacer Chain Lift Head Rail an attractively rounded headrail,
The pre-loaded cord spool, ensures the cords pull up straight and at equal speeds, thus making sure the Roman lift eavenly.
This Kit With Chain Break allows for a longer length of chain to be used but must still be a minimum of 60cm from the floor.
This Device is designed to breakaway if too much pressure is applied to the lifting chain we have tested them and they will operate with a 1:1 ratio gearing on the blind.The chain break is best positioned at the bottom of the chain loop so as not to put pressure on it when lifting the blind. We will position this for you when you enter your size options we will need the width, length & hight of the blind to work this out.
These kits are made by us and do not come in retail packaging
We will also cut these blind rails to your sizes at no extra cost.
Please state sizes as width then drop. If Height Not Known then we will make the chain to your chosen length or a maximum of 1mt whichever is shorter. (It will be the responsibility the fitter to ensure the blind is fitted to the new Child Safe regulations)


Supplied with Headrail system
PARTS INCLUDED
Track Size Brackets____ Cord Spools____ Cord Adjuster____
60cm & 90cm 2 2 2
120cm & 150cm 3 3 3
180cm & 210cm 4 4 4
240cm 5 5 5

This allows spools to be a maximum 15cm from each end and no more than 60cm apart. This is what is required for a roman blind
If you need more spools add from drop down menu




Our products are compliant with the child safety requirements of BS EN 13120
This will mean that for blinds that we don't know the height, the continuous operating chains will be 2/3 of the drop of the blind with a maximum length of 1mt.
It will be up to the fitter to comply with the standards, as chains with a breakaway connector should be at least 60cm from the floor.

Click Here For PDF Instructions



Recently Viewed